Διεθνή Πρότυπα Μέτρησης Δονήσεων
Πίνακας με τα Διεθνή Πρότυπα Μέτρησης Δονήσεων – Κραδασμών σύμφωνα με τον Οργανισμό και την Χώρα έκδοσης AS BS DIN EN GB (China) IEC ISO JIS MIL VDI
Ο παρακάτω πίνακας σας δείχνει μια συλλογή προτύπων που σχετίζονται με τη μέτρηση κραδασμών.
| Οργάνωση / Αριθμός | Περιγραφή |
| ANSI – American National Standards | |
| ANSI S2.1 | Vibration and Shock – Vocabulary |
| ANSI S2.2 | Methods for the Calibration of Shock and Vibration Pickups |
| ANSI S2.4 | Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements |
| ANSI S2.7 | Balancing Terminology |
| ANSI S2.13 | Mechanical Vibration of Non-Reciprocating Machines – Measurements on Rotating Shafts and Evaluation Part 1: General Guidelines |
| ANSI S2.16 | Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment |
| ANSI S2.17 | Machinery Vibration Measurement |
| ANSI S2.19 | Mechanical Vibration – Balance Quality Requirements of Rigid Rotors Part 1: Determination of Permissible Residual Unbalance |
| ANSI S2.25 | Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships |
| ANSI S2.26 | American National Standard Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment |
| ANSI S2.28 | Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery |
| ANSI S2.29 | Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery |
| ANSI S2.40 | Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity |
| ANSI S2.41 | Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s – Measurement and Evaluation of Mechanical Vibration Severity in situ |
| ANSI S2.42 | Procedures for Balancing of Flexible Rotors |
| ANSI S2.43 | Criteria for Evaluating Flexible Rotor Balance |
| ANSI S2.45 | Electrodynamic Test Equipment for Generating Vibration – Method of Describing Equipment Characteristics |
| ANSI S2.46 | Characteristics to be Specified for Seismic Transducers |
| ANSI S2.47 | Vibration of Buildings – Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings |
| ANSI S2.48 | Servo-Hydraulic Test Equipment for Generating Vibration – Methods of Describing Characteristics |
| ANSI S2.58 | Auxiliary Tables for Vibration Generators – Methods of Describing Equipment Characteristics |
| ANSI S2.61 | Guide to the Mechanical Mounting of Accelerometers |
| ANSI S2.70 | Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand |
| ANSI S2.73 | Mechanical Vibration and Shock–Hand-arm Vibration–Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand |
| ANSI S3.18 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration ( ISO 2631) |
| ANSI S3.29 | Guide to the Evaluation of Human Exposure to Vibration in Buildings |
| ANSI S3.32 | Mechanical Vibration and Shock Affecting Man – Vocabulary |
| ANSI S3.34 | Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of |
| ANSI S3.40 | Mechanical Vibration and Shock – Hand-Arm Vibration – Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand ( ISO 10819) |
| ANSI S12.11 | Acoustics – Measurement of noise and vibration of small air-moving devices Part 2: Structure-borne vibration |
| ANSI/AGMA 6000-B96 | Specification for Measurement of Linear Vibration on Gear Units |
| ANSI/ASHRAE 87.1 | Method of Testing Fan Vibration–Blade Vibrations and Critical Speeds |
| ANSI/ASHRAE 87.3 | Methods of Testing Propeller Fan Vibration—-Diagnostic Test Methods |
| ARI 530-95 | Method of Rating Sound and Vibration of Refrigerant Compressors |
| AS – Aviation, Space and Defense industries | |
| AS 1359.114 | Rotating electrical machines – General requirements – Vibration measurements and limits (IEC 34-14) |
| AS 1807.17 AS 1807.18 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test Part 17: Determination of vibration in cleanrooms Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators |
| AS 2362.15 | Fire detection, warning, control and intercom systems – Methods of test – Vibration test |
| AS 2400.10 | Packaging – Protection against shock and vibration (cushioning) |
| AS 2582.6 AS 2582.11 | Complete, filled transport packages – Methods of test Part 6: Vibration test at fixed low frequency Part 11: Sinusoidal vibration tests using a variable frequency |
| AS 2606 | Vibration and shock – Vocabulary (ISO 2041) |
| AS 2625.1 AS 2625.4 | Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) Part 1: General guidelines Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ |
| AS 2641 | Vibration and shock – Balancing – Vocabulary (ISO 1925) |
| AS 2670.1 AS 2670.2 AS 2670.4 | Evaluation of human exposure to whole-body vibration (ISO 2631) Part 1: General requirements Part 2: Continuous and shock-induced vibration in buildings (1 to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| AS 2763 | Vibration and shock – Hand-transmitted vibration – Guidelines for measurement and assessment of human exposure |
| AS 2775 | Mechanical vibration and shock – Mechanical mounting of accelerometers (ISO 5348) |
| AS 2955 | Earth-moving machinery – Tests and measurements – Operator seat – Transmitted vibration |
| AS 2973 | Vibration and shock – Human response vibration-measuring instrumentation |
| AS 2993 | Vibration and shock – Dynamic characteristics of the human body – Driving point impedance of the human body |
| AS 3658 | Vibration and shock – Mechanical vibration and shock affecting humans – Vocabulary (ISO 5805) |
| AS 3709 | Vibration and shock – Balance quality of rotating rigid bodies (ISO 1940-1) |
| AS 3721 | Vibration and shock – Balancing machines – Description and evaluation (ISO 2953) |
| AS 3728 | Vibration and shock – Resilient shaft couplings – Information to be supplied by users and manufacturers |
| AS 3762 | Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868) |
| AS 3763 | Mechanical vibration and shock – Guidelines for the overall evaluation of vibration in merchant ships (ISO 20283-5) |
| AS 3764 | The measurement and reporting of shipboard vibration data (ISO 4867) |
| AS 4594.5 | Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional vibrations (ISO 3046) |
| ASTM – American Society for Testing Materials | |
| ASTM D999-01 | Standard Methods for Vibration Testing of Shipping Containers |
| ASTM D3580-95 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D4728-01 | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ASTM D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D6874-03 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
| BS – British Standards | |
| BS 848-7 | Fans for general purposes. Specifications for balancing and vibration ( ISO 14694) |
| BS 848-10 | Fans for general purposes. Performance testing of jet fans ( ISO 13350) |
| BS 2011-2 | Environmental testing. Random vibration – wide band reproducibility high |
| BS 2782 | Methods of testing plastics ( ISO 6721) |
| BS 3015 | Glossary of terms relating to mechanical vibration and shock ( ISO 2041) |
| BS 3375 | Management services. Guide to determination of exposure limits, recovery times and relaxation times in work measurement |
| BS 4220 | Tests for a seat intended for a nominated tractor model; provides for measurement of transmitted vertical vibration on artificial track. |
| BS 4675-2 | Mechanical vibration in rotating machinery. Requirements for instruments for measuring vibration severity ( ISO 2954) |
| BS 4999-142 | General requirements for rotating electrical machines. Specification for mechanical performance: vibration |
| BS 5000-3 | Specifies generators with outputs greater than 0.75 kW or kVA per 100 r/min, matched to characteristics of internal combustion engines. Torsional and linear vibrational withstand levels are specified |
| BS 5228-1 BS 5228-2 BS 5228-3 BS 5228-4 BS 5228-5 | Noise and vibration control on construction and open sites. Part 1: Code of practice for basic information and procedures for noise and vibration control Part 2: Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance Part 3: Code of practice applicable to surface coal extraction by opencast methods Part 4: Code of practice for noise and vibration control applicable to piling operations Part 5: Code of practice applicable to surface mineral extraction (except coal) sites |
| BS 6140-2 | Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration ( ISO 6070) |
| BS 6414 | Method for specifying characteristics of vibration and shock isolators ( ISO 2017) |
| BS 6472 | Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz) |
| BS 6611 | Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) |
| BS 6632 | Method for measurement and reporting of shipboard vibration data ( ISO 4867) |
| BS 6633 | Method for measurement and reporting of local vibration data of ship structures and equipment ( ISO 4868) |
| BS 6794 | Method for reporting measured vibration data for land vehicles ( ISO 8002) |
| BS 6841 | Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock |
| BS 6861-1 BS 6861-2 | Mechanical vibration. Balance quality requirements of rigid rotors. Part 1: Method for determination of permissible residual unbalance ( ISO 1940-1) Part 2: Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors ( ISO 1940-2) |
| BS 6897 | Experimental determination of mechanical mobility ( ISO 7626) |
| BS 6916-8 | Chain saws. Method of measurement of hand-transmitted vibration ( ISO 7505) |
| BS 6955-1..22 | Calibration of vibration and shock pick-ups ( ISO 5347) |
| BS 7085 | Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock |
| BS 7119 | Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups ( ISO 8042) |
| BS 7385-1 BS 7385-2 |
Evaluation and measurement for vibration in buildings. Part 1: Guide for measurement of vibrations and evaluation of their effects on buildings ( ISO 4866) Part 2: Guide to damage levels from ground-borne vibration |
| BS 7482-1 BS 7482-2 BS 7482-3 |
Instrumentation for the measurement of vibration exposure of human beings. Part 1: Specification for general requirements for instrumentation for measuring the vibration applied to human beings Part 2: Specification for instrumentation for measuring vibration transmitted to the hand Part 3: Specification for instrumentation for measuring vibration exposure to the whole body |
| BS 7527-2.6 | Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 60721-2-6) |
| BS 7698-9 | Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations ( ISO 8528-9) |
| BS 7853 | Mechanical vibration. Road surface profiles. Reporting of measured data ( ISO 8608) |
| BS 7854 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts ( ISO 10816) |
| CR 1030-1 CR 1030-2 |
Hand-arm vibration – Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery Part 2: Management measures at the workplace |
| CR 12349 | Mechanical vibration – Guide to the health effects of vibration on the human body |
| DIN – Deutsches Institut für Normung | |
| DIN 1311-1 DIN 1311-2 DIN 1311-3 DIN 1311-4 |
Mechanical vibrations, oscillation and vibration systems Part 1: Basic concepts, survey Part 2: Linear vibration systems with single degree of freedom Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom Part 4: Vibration; vibrating continua, waves |
| DIN 3979 | Tooth Damage on Gear Trains; Designation, Characteristics, Causes |
| DIN 4150-1 DIN 4150-2 DIN 4150-3 |
Vibrations in buildings Part 1: Prediction of vibration parameters Part 2: Effects on persons in buildings Part 3: Effects on structures |
| DIN 4178 | Construction supervision: technical building regulations; bell towers |
| DIN 5426-1 | Rolling bearings – Rolling bearing vibration and noise Part 1: Methods for measurement of structure-borne noise |
| DIN 25475-2 | Nuclear facilities – Operational monitoring Part 2: Vibration monitoring for early detection of changes in the vibrational behaviour of the primary coolant circuit in pressurized water reactors |
| DIN 30787-6 | Transportation loads – Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring random shock while monitoring transports |
| DIN 31692-3 | Plain bearings Part 3: Vibration monitoring |
| DIN 45635-8 | Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements |
| DIN 45661 | Vibration measuring instrumentation – Vocabulary |
| DIN 45662 | Vibration measuring instrumentation – Fundamental requirements and verification |
| DIN 45667 | Classification methods for evaluation of random vibrations |
| DIN 45669-1 DIN 45669-2 DIN 45669-3 |
Measurement of vibration immission Part 1: Vibration meters; requirements, verification Part 2: Measuring method Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ (draft standard) |
| DIN 45671-1 DIN 45671-2 DIN 45671-3 |
Measurement of exposure to occupational vibration Part 1: Vibration meters; Requirements, testing Part 2: replaced by ISO 5349-2 Part 3: Test (calibration and assessment) of the vibration meter; primary test, verification, intermediate test, check in situ |
| DIN 45672-1 DIN 45672-2 |
Vibration measurement associated with railway traffic systems Part 1: Measuring method Part 2: Evaluation method |
| DIN 45673-1 DIN 45673-2 |
Mechanical vibration – Resilient elements used in railway tracks Part 1: Laboratory determination of static and dynamic characteristics Part 2: Determination of static and dynamic characteristics in the track under operation |
| DIN 45675-2 DIN 45675-3 |
Exposure to mechanical vibration transmitted to the hand-arm system Part 2: Measurement of vibration induced by portable chain saws Part 3: Measurement of vibration induced by portable, internal combustion engine brush saws |
| DIN 45678 | Mechanical vibration – Articulated trucks – Laboratory method for evaluating vehicle seat vibration |
| DIN V 45679 | Mechanical vibration – Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration |
| DIN 45694 | Mechanical vibration – Guideline for the assessment of exposure to hand-transmitted vibration based on information provided by manufacturers of machinery (draft standard) |
| DIN 45695 | Hand-arm vibration – Guidelines for vibration hazards reduction – Engineering and management measures ( CR 1030-1 and CR 1030-2) |
| DIN 50100 | Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation |
| DIN 52210 | Testing of acoustics in buildings; airborne impact and sound insulation |
| DIN 70003 | Vibrational stress; measurement of parameters on vehicle parts |
| D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| D3580-95 | Standard Test Methods for vibration (Vertical Linear Motion) Test of Products |
| EN – European Standards | |
| EN 1032 | Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value |
| EN 1033 | Hand-arm vibration – Laboratory measurement of vibration at the grip surface of hand-guided machinery – General |
| EN 1177 | Impact attenuating playground surfacing – Determination of critical fall height |
| EN 1299 | Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation |
| EN 12096 | Mechanical vibration – Declaration and verification of vibration emission |
| EN 12503 | Sports mats – Part 4: Determination of shock absorption |
| EN 12786 | Safety of machinery – Guidance for the drafting of vibration clauses of safety standards |
| EN 13059 | Safety of industrial trucks – Test methods for measuring vibration |
| EN 13490 | Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration |
| EN 14253 | Mechanical vibration – Measurement and calculation of occupational exposure to whole-body vibration with reference to health – Practical guidance |
| EN 28662-1 EN 28662-2 EN 28662-3 EN 28662-5 | Hand-held portable power tools – Measurement of vibrations at the handle Part 1: General ( ISO 8662-1) Part 2: Chipping hammers and riveting hammers ( ISO 8662-2) Part 3: Rock drills and rotary hammers ( ISO 8662-3) Part 5: Pavement breakers and hammers for construction work ( ISO 8662-5) |
| EN 30326-1 | Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements ( ISO 10326-1) |
| EN 60034-14 | Rotating electrical machines – Part 14 : Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration |
| EN 60745 | Hand-held motor-operated electric tools – Safety Part 1: General requirements Part 2-1: Particular requirements for drills and impact tools Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws Part 2-6: Particular requirements for hammers Part 2-7: Particular requirements for spray guns Part 2-8: Particular requirements for sheet metal shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Part 2-12: Particular requirements for concrete vibrators Part 2-13: Particular requirements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-16: Particular requirements for tackers Part 2-17: Particular requirements for routers Part 2-18: Particular requirements of strapping tools Part 2-19: Particular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for drain cleaners |
| EN 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
| EN 61959 | Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries |
| ENV 25349 | Mechanical vibration – Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration ( ISO 5349) |
| ENV 28041 | Human response to vibration – Measuring instrumentation ( ISO 8041) |
| E90-E350 | Methods for the calibration of vibration and shock pick-ups |
| FD E90-694 | Mechanical vibration and shock – Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system. |
| GB 10068-2000 | Mechanical vibration of certain machines with shaft heights 56 mm and higher–Measurement, evaluation and limits of vibration |
| GB 10070 | Standard of environmental vibration in urban area |
| GB 10434 | Hygienic standard for hand-transmitted vibration in the work environment |
| GB 4869 | Diagnostic criteria and principles of management of occupational vibration disease |
| GB/T 10071 | Measurement method of environmental vibration of urban area |
| GB/T 10084 | Vibration and shock–methods for analysis and presentation of data |
| GB/T 10283 | Portable pneumatic extinguishers–Measurement of hand-transmitted vibration |
| GB/T 10397 | Small and medium power engines-Evaluation of vibration |
| GB/T 10593.3 | Methods of measuring environmental parameters for electric and electronic products–Treatment and induction for the vibration data |
| GB/T 10895 | Centrifuge and separator-Measurement method of mechanical vibration |
| GB/T 10910 | Agricultural wheeled tractors and field machinery-Measurement of whole-body vibration of the operator |
| GB/T 11287 | Electrical relays–Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment |
| GB/T 11348.1 GB/T 11348.2 GB/T 11348.3 GB/T 11348.4 GB/T 11348.5 |
Mechanical vibration of non-reciprocating machines–Measurements on rotating shafts and evaluation criteria Part 1: General guidelines Part 2: Large land-based steam turbine generator sets Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants |
| GB/T 11706 | Measurement method of vibration for marine engine room auxiliaries |
| GB/T 13364 | Measurement of mechanical vibration for reciprocating pump |
| GB/T 13436 | Technical requirements for torsional vibration measuring instruments |
| GB/T 13441 | Specification for measurement of human exposure to whole-body vibration environment |
| GB/T 13442 | Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration |
| GB/T 13670 | Mechanical vibration–Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles |
| GB/T 13823.1 GB/T 13823.2 GB/T 13823.3 GB/T 13823.4 GB/T 13823.5 GB/T 13823.6 GB/T 13823.7 GB/T 13823.8 GB/T 13823.9 GB/T 13823.10 GB/T 13823.11 GB/T 13823.12 GB/T 13823.13 GB/T 13823.14 GB/T 13823.15 GB/T 13823.16 GB/T 13823.17 GB/T 13823.18 |
Methods for the calibration of vibration and shock pick-ups Part 1: Basic concepts Part 2: Primary vibration calibration by laser interferometry Part 3: Comparison(secondary vibration)calibration by sinusoidal excitation Part 4: Testing of magnetic field sensitivity Part 5: Testing of mounting torque sensitivity Part 6: Testing of base strain sensitivity Part 7: Primary vibration calibration by comparison of phase angles Part 8: Testing of transverse vibration sensitivity Part 9: Testing of transverse shock sensitivity Part 10: Methods for the calibration of vibration and shock pick-ups–Secondary shock calibration Part 11: Primary vibration calibration by laser interferometry at low frequencies Part 12: Resonance frequency testing of undamped accelerometers on a steel block Part 13: Primary shock calibration by light cutting Part 14: Primary calibration by centrifuge Part 15: Testing of transient temperature sensitivity Part 16: Testing of temperature response by comparison Part 17: Testing of acoustic sensitivity Part 18: Primary vibration calibration by reciprocity method |
| GB/T 13824 | Requirements for instruments for measuring vibration severity |
| GB/T 13860 | Mechanical vibrations–Land vehicles-Method for reporting measured data |
| GB/T 13866 | Shock and vibration measurements–Characteristics to be specified for seismic pick-ups |
| GB/T 13876 | Evaluation criteria of whole body vibration of the operator |
| GB/T 14124 | Mechanical vibration and shock–Measurement and evaluation of vibration effects on buildings–Guidelines for the use of basic standard methods |
| GB/T 14125 | Vibration and shock sensitive equipment–Methods of measurement and reporting data of vibration and shock effects in buildings |
| GB/T 14179 | Brush saws–Measurements of hand-transmitted vibration |
| GB/T 14412 | Mechanical vibration and shock–Mechanical mounting of accelerometers |
| GB/T 14696 | Code for the measurement of ship vibration |
| GB/T 14697 | Code for the measurement of local vibration of ship |
| GB/T 14790 | Methods for the measurement and the assessment of human exposure to hand-transmitted vibration |
| GB/T 15619 | Terminology for human exposure to mechanical vibration and shock |
| GB/T 16301 | Evaluation of vibration severity for marine engine-room auxiliaries |
| GB/T 16440 | Vibration and shock–Mechanical driving point impedance of the human body |
| GB/T 16441 | Vibration and shock–Mechanical transmissibility of the human body in the z direction |
| GB/T 16539 | Determination of sound power levels of noise sources using vibration velocity–Measurement for seal machinery |
| GB/T 16768 | Metal-cutting machine tools–Measurement method for vibration |
| GB/T 16908 | Mechanical vibration–Balancing–Shaft and fitment key convention |
| GB/T 17046 | Vibratory rollers Parts The evaluation to exposure mechanical vibration |
| GB/T 17189 | Code for field measurement of vibrations and pulsations in hydraulic machines |
| GB/T 17958 | Requirements for vibration hazards reduction of hand-held machines at the workplace |
| GB/T 18051 | Tests of electric submersible pump system vibration |
| GB/T 18368 | Comfort evaluation of human exposure to whole-body vibration in recumbent position |
| GB/T 18703 | Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| GB/T 18707.1 | Mechanical vibration–Laboratory method for evaluating vehicle seat vibration–Part 1: Basic requirements |
| GB/T 2298 | Mechanical vibration and shock-Terminology |
| GB/T 2414.1 GB/T 2414.2 |
Test methods for the properties of piezoelectric ceramics Part 1: Radial extension vibration mode for disk Part 2: Transverse length extension vibration mode for bar |
| GB/T 2423.10 GB/T 2423.11 GB/T 2423.12 GB/T 2423.14 GB/T 2423.42 GB/T 2423.43 GB/T 2423.47 GB/T 2423.48 GB/T 2423.49 |
Environmental testing for electric and electronic products–Part 2: Test methods Part 10: Test Fc and guidance: Vibration (Sinusoidal) Part 11: Test Fd: Random vibration wide band Part 12: Test Fda: Random vibration wide band–Reproducibility high Part 14: Test Fdc: Random vibration wide band–Reproducibility low Part 42: Combined low temperature/low air pressure / vibration (sinusoidal) test Part 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) Part 47: Test Fg: Vibration, acoustically induced Part 48: Test Ff: Vibration–Time-history method Part 49: Test Fe: Vibration–sine-beat method |
| GB/T 3389.4 GB/T 3389.5 GB/T 3389.6 |
Test methods for the properties of piezoelectric ceramics Part 4: Longitudinal length extension vibration mode for rod Part 5: Thickness extension vibration mode for disk Part 6 Thickness-shear vibration mode for rectangular plate: |
| GB/T 4451 | Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument |
| GB/T 4857.10 | Packaging–Transport packages–Sinusoidal vibration test method using a variable vibration frequency |
| GB/T 4857.7 | Packaging–Transport packages–Sinusoidal vibration test method at constant frequency |
| GB/T 5170.13 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Mechanical vibrating type machines for vibration (sinusoidal) test |
| GB/T 5170.15 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Hydraulic vibrating type machines for vibration |
| GB/T 5395 | Portable chain saws-Measurement of hand-transmitted vibration |
| GB/T 5913 | Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site |
| GB/T 6444 | Mechanical vibration–Balancing vocabulary |
| GB/T 6587.4 | Vibration tests for electronic measuring instruments |
| GB/T 7031 | Vehicle vibration–Describing method for road surface irregularity |
| GB/T 7183 | Evaluation of mechanical vibration severity of machines and equipments in electric locomotives |
| GB/T 7184 | Measurement method of vibration for small and medium power diesel engines |
| GB/T 7452.1 | Guidelines for the overall evaluation of vibration in merchant ships |
| GB/T 7452.2 | Guidelines for the overall evaluation of vibration in merchant ships under 100m |
| GB/T 7453 | Measurement of ship vibration |
| GB/T 8543 | Determination of mechanical vibrations of gear units during acceptance testing |
| IBM | IBM ® Standards Authority for Vibration and Shock, classes of vibration environments |
| IEC – International Electrotechnical Commission | |
| IEC 60034-14 | Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity |
| IEC 60068-2-.. | Environmental testing Part 2: Methods of test |
| IEC 60068-3-8 | Environmental testing Part 3-8: Supporting documentation and guidance – Selecting amongst vibration tests |
| IEC 60255-21 | Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment |
| IEC 60512-6-4 IEC 60512-6-5 |
Electromechanical components for electronic equipment – Basic testing procedures and measuring methods – Part 6-4: Dynamic stress tests – Test 6d: Vibration (sinusoidal) Part 6: Dynamic stress tests – Section 5: Test 6e: Random vibration |
| IEC 60721-2-6 | Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
| IEC 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
| IEC 60745 | Hand-held motor-operated electric tools – Safety |
| IEC 60749-12 | Semiconductor devices – Mechanical and climatic test methods Part 12: Vibration, variable frequency |
| IEC 61300-2-1 | Fibre optic interconnecting devices and passive components – Basic test and measurement procedures Part 2-1: Tests – Vibration (sinusoidal) |
| IEC 61373 | Railway applications. Rolling stock equipment. Shock and vibration tests |
| IEC 61502 | Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures |
| IEEE 344 | IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations |
| IEEE 1451.4 | IEEE Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats |
| ISA-RP37.2 | Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing |
| ISO – International Organization for Standardization | |
| ISO 140 | Acoustics — Measurement of sound insulation in buildings and of building elements |
| ISO 1925 | Mechanical vibration – Balancing – Vocabulary |
| ISO 1940-1 ISO 1940-2 |
Mechanical vibration – Balance quality requirements of rigid rotors Part 1: Determination of permissible residual unbalance Part 2: Balance errors |
| ISO 2017 | Method for specifying characteristics of vibration and shock isolators |
| ISO 2041 | Vibration and shock – Vocabulary |
| ISO 2247 | Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency |
| ISO 2371 | Field balancing equipment – Description and evaluation (withdrawn) |
| ISO 2372 | Mechanical vibration of machines with operating speeds from 10 to 200 rev/s – Basis for specifying evaluation standards (withdrawn, replaced by ISO 10816-1) |
| ISO 2373 | Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity (withdrawn) |
| ISO 2631-1 ISO 2631-2 ISO 2631-4 ISO 2631-5 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration Part 1: General requirements Part 2: Vibration in buildings (1 Hz to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems Part 5: Method for evaluation of vibration containing multiple shocks |
| ISO 2671 | Environmental tests for aircraft equipment — Part 3.4: Acoustic vibration |
| ISO 2953 | Balancing machines – Description and evaluation |
| ISO 2954 | Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity |
| ISO 3046-5 | Reciprocating internal combustion engines — Performance Part 5: Torsional vibrations |
| ISO 3945 | Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s – Measurement and evaluation of vibration severity in situ (withdrawn, replaced by ISO 10816) |
| ISO 4866 | Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings |
| ISO 4867 | Method for measurement and reporting of shipboard vibration data |
| ISO 4868 | Method for measurement and reporting of local vibration data of ship structures and equipment |
| ISO 5007 | Agricultural wheeled tractors. Operator’s seat. Laboratory measurement of transmitted vibration |
| ISO 5008 | Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator |
| ISO 5344 | Electrodynamic vibration generating systems – Performance characteristics |
| ISO 5347-4 ISO 5347-5 ISO 5347-6 ISO 5347-7 ISO 5347-8 ISO 5347-10 ISO 5347-11 ISO 5347-12 ISO 5347-13 ISO 5347-14 ISO 5347-15 ISO 5347-16 ISO 5347-17 ISO 5347-18 ISO 5347-19 ISO 5347-22 |
Methods for the calibration of vibration and shock pick-ups Part 4: Secondary shock calibration Part 5: Calibration by Earth’s gravitation Part 6: Primary vibration calibration at low frequencies Part 7: Primary calibration by centrifuge Part 8: Primary calibration by dual centrifuge Part 10: Primary calibration by high impact shocks Part 11: Testing of transverse vibration sensitivity Part 12: Testing of transverse shock sensitivity Part 13: Testing of base strain sensitivity Part 14: Resonance frequency testing of undamped accelerometers on a steel block Part 15: Testing of acoustic sensitivity Part 16: Testing of mounting torque sensitivity Part 17: Testing of fixed temperature sensitivity Part 18: Testing of transient temperature sensitivity Part 19: Testing of magnetic field sensitivity Part 22: Accelerometer resonance testing — General methods |
| ISO 5348 | Mechanical vibration and shock – Mechanical mounting of accelerometers |
| ISO 5349-1 ISO 5349-2 |
Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements Part 2: Practical guidance for measurement at the workplace |
| ISO 5805 | Mechanical vibration and shock affecting man – Vocabulary |
| ISO 5982 | Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration |
| ISO 6070 | Auxiliary tables for vibration generators – Methods of describing equipment characteristics |
| ISO 6721 | Determination of dynamic mechanical properties |
| ISO 6897 | Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) |
| ISO 6954 | Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (withdrawn and replaced by ISO 20283-5) |
| ISO 7096 | Earth-moving machinery. Laboratory evaluation of operator seat vibration |
| ISO 7505 | Forestry machinery — Chain saws — Measurement of hand-transmitted vibration |
| ISO 7626-1 ISO 7626-2 ISO 7626-5 |
Vibration and shock – Experimental determination of mechanical mobility Part 1: Basic definitions and transducers Part 2: Measurements using single-point translation excitation with an attached vibration exciter Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
| ISO/TR 7849 | Acoustics — Estimation of airborne noise emitted by machinery using vibration measurement |
| ISO 7916 | Forestry machinery — Portable brush-saws — Measurement of hand-transmitted vibration |
| ISO 7919-1 ISO 7919-2 ISO 7919-3 ISO 7919-4 ISO 7919-5 |
Mechanical vibration of non-reciprocating machines -Measurements on rotating shafts and evaluation Part 1: General guidelines Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 8002 | Method for reporting measured vibration data for land vehicles |
| ISO 8041 | Human response to vibration. Measuring instrumentation |
| ISO 8042 | Shock and vibration measurements – Characteristics to be specified for seismic pick-ups |
| ISO 8313 | Packaging — Complete, filled transport packages and unit loads — Sinusoidal vibration tests using a variable frequency |
| ISO 8568 | Mechanical shock – Testing machines – Characteristics and performance |
| ISO 8569 | Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings |
| ISO 8528-9 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| ISO 8579-2 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 8608 | Mechanical vibration — Road surface profiles — Reporting of measured data |
| ISO 8626 | Servo-hydraulic test equipment for generating vibration – Method of describing characteristics |
| ISO 8662-1 ISO 8662-2 ISO 8662-3 ISO 8662-4 ISO 8662-5 ISO 8662-6 ISO 8662-7 ISO 8662-8 ISO 8662-9 ISO 8662-10 ISO 8662-11 ISO 8662-12 ISO 8662-13 ISO 8662-14 |
Hand-held portable power tools — Measurement of vibrations at the handle Part 1: General Part 2: Chipping hammers and riveting hammers Part 3: Rock drills and rotary hammers Part 4: Grinders Part 5: Pavement breakers and hammers for construction work Part 6: Impact drills Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action Part 8: Polishers and rotary, orbital and random orbital sanders Part 9: Rammers Part 10: Nibblers and shears Part 11: Fastener driving tools Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action Part 13: Die grinders Part 14: Stone-working tools and needle scalers |
| ISO 8727 | Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems |
| ISO 8821 | Mechanical vibration – Balancing – Shaft and fitment key convention |
| ISO 9688 | Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses |
| ISO 9996 | Mechanical vibration and shock — Disturbance to human activity and performance — Classification |
| ISO 11342 | Mechanical vibration – Methods and criteria for the mechanical balancing of flexible rotors |
| ISO 10055 | Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components |
| ISO 10056 | Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| ISO 10068 | Mechanical vibration and shock — Free, mechanical impedance of the human hand-arm system at the driving point |
| ISO 10326-1 ISO 10326-2 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements Part 2: Application to railway vehicles |
| ISO/TS 10811-1 ISO/TS 10811-2 |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Part 2: Classification |
| ISO 10813-1 ISO 10813-3 |
Vibration generating machines — Guidance for selection Part 1: Equipment for environmental testing Part 3: Equipment to be used in a shock mode (draft standard) |
| ISO 10814 | Mechanical vibration — Susceptibility and sensitivity of machines to unbalance |
| ISO 10815 | Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains |
| ISO 10816-1 ISO 10816-2 ISO 10816-3 ISO 10816-4 ISO 10816-5 ISO 10816-6 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts (see ISO 20816-1) Part 1: General guidelines Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (see ISO 20816-2) Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ Part 4: Gas turbine driven sets excluding aircraft derivatives Part 5: Machine sets in hydraulic power generating and pumping plants (see ISO 20816-5) Part 6: Reciprocating machines with power ratings above 100 kW |
| ISO 10817-1 | Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration |
| ISO 10819 | Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| ISO 10846-1 ISO 10846-2 ISO 10846-3 ISO 10846-4 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 1: Principles and guidelines Part 2: Dynamic stiffness of elastic supports for translatory motion — Direct method Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| ISO 11342 | Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors |
| ISO 13090-1 | Mechanical vibration and shock – Guidance on safety aspects of tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock |
| ISO 13091-1 ISO 13091-2 |
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips Part 2: Analysis and interpretation of measurements at the fingertips |
| ISO 13332 | Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| ISO 13350 | Industrial fans — Performance testing of jet fans |
| ISO 13355 | Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test |
| ISO 13373-1 ISO 13373-2 ISO 13373-3 ISO 13373-4 ISO 13373-5 ISO 13373-7 ISO 13373-9 |
Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 1: General procedures Part 2: Processing, analysis and presentation of vibration data Part 3: Guidelines for vibration diagnosis Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings Part 5: Diagnostic techniques for fans and blowers Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants Part 9: Diagnostic techniques for electric motors |
| ISO 13374 | Condition monitoring and diagnostics of machines – Data processing, communication and presentation |
| ISO 13379 | Condition monitoring and diagnostics of machines – General guidelines on data interpretation and diagnostics techniques |
| ISO 13753 | Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system |
| ISO 14694 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 14695 | Fans for general purposes. Method of measurement of fan vibration |
| ISO 14839-1 ISO 14839-2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary Part 2: Evaluation of vibration |
| ISO 14963 | Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts |
| ISO 14964 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| ISO 15242-1 ISO 15242-2 ISO 15242-3 ISO15242-4 |
Rolling bearings — Measuring methods for vibration Part 1: Fundamentals Part 2: Radial ball bearings with cylindrical bore and outside surface Part 3: Radial double-row spherical and tapered roller bearings with cylindrical bore and outside surface Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
| ISO 15243 | Rolling bearings — Damage and failures — Terms, characteristics and causes |
| ISO/TS 15694 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system |
| ISO 16063-1 ISO 16063-11 ISO 16063-12 ISO 16063-13 ISO 16063-15 ISO 16063-16 ISO 16063-21 ISO 16063-22 ISO 16063-31 ISO 16063-32 ISO 16063-33 ISO 16063-34 ISO 16063-41 ISO 16063-42 ISO 16063-43 ISO 16063-44 ISO 16063-45 |
Methods for the calibration of vibration and shock transducers Part 1: Basic concepts Part 11: Primary vibration calibration by laser interferometry Part 12: Primary vibration calibration by the reciprocity method Part 13: Primary shock calibration using laser interferometry Part 15: Primary angular vibration calibration by laser interferometry Part 16: Calibration by Earth’s gravitation Part 21: Vibration calibration by comparison with a reference transducer Part 22: Shock calibration by comparison with a reference transducer (replacement for ISO 5347-4) Part 31: Testing of transverse vibration sensitivity Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation Part 33: Testing of magnetic field sensitivity Part 34: Testing of sensitivity at fixed temperatures Part 41: Calibration of laser vibrometers Part 42: Calibration of seismometers with high accuracy using acceleration of gravity Part 43: Calibration of accelerometers by model-based parameter identification Part 44: Calibration of field vibration calibrators Part 45: In-situ calibration of transducers with built in calibration coil |
| ISO 18431-1 ISO 18431-2 ISO 18431-4 |
Mechanical vibration and shock — Signal processing Part 1: General introduction Part 2: Time domain windows for Fourier Transform analysis Part 4: Shock-response spectrum analysis |
| ISO 18436-1 ISO 18436-2 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process Part 2: Vibration condition monitoring and diagnostics |
| ISO 18649 | Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges |
| ISO/TR 19664 | Human response to vibration — Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety |
| ISO 20283-2 | Mechanical vibration – Measurement of vibration on ships – Part 2: Measurement of structural vibration |
| ISO 20283-3 | Mechanical vibration – Measurement of vibration on ships – Part 3: Pre-installation vibration measurement of shipboard equipment |
| ISO 20283-4 | Mechanical vibration – Measurement of vibration on ships – Part 4: Measurement and evaluation of vibration of the ship propulsion machinery |
| ISO 20283-5 | Mechanical vibration – Measurement of vibration on ships – Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships |
| ISO 20643 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| ISO 20816-1 ISO 20816-2 ISO 20816-5 |
Mechanical vibration — Measurement and evaluation of machine vibration Part 1: General guidelines Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Part 5: Machine sets in hydraulic power generating and pump-storage plants |
| ISO 22867 | Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles |
| JIS – Japanese Industrial Standards | |
| JIS B 0906 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — General guidelines |
| JIS B 0907 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| JIS B 0910 | Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria |
| JIS B 0911 | Mechanical vibration — Susceptibility and sensitivity of machines to unbalance |
| JIS B 1754 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| JIS C 1510 | Vibration level meters |
| JIS C 1512 | Level recorders for recording sound level and/or vibration level |
| JIS D 1601 | Vibration testing methods for automobile parts |
| JIS E 3014 | Parts for railway signal -Vibration test methods |
| JIS E 4023 | Vibration characteristics of railway rolling stock — Measuring methods |
| JIS E 4031 | Railway rolling stock parts — Test methods for vibration |
| JIS Z 0232 | Packaged freights — Method of vibration test |
| JIS Z 8735 | Methods of measurement for vibration level |
| MIL – United States Military Standard | |
| MIL-A-8870C | Airplane Strength and Rigidity Vibration, Flutter, and Divergence |
| MIL-STD-167 | Mechanical Vibrations On Ship Board Systems |
| MIL-STD-167/1 | Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited) |
| MIL-STD-167/2 | MIL-STD-167/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V |
| MIL-STD-202G | Test Method 201A: Vibration |
| MIL-STD-202G | Test Method 204D: Vibration, High Frequency |
| MIL-STD-202G | Test Method 214A: Random Vibration |
| MIL-STD-810F | Test Method Standard for Environmental Engineering |
| NEMA MG1 | Assists users in the proper selection and application of motors and generators. |
| NF S30-102 | Acoustics. Terminology. Transmission systems and transducers for sound and vibrations |
| PD 6585-2 | Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace |
| S31-087 | Acoustics. Estimation of airborne noise emitted by machinery using vibration measurement |
| SN 640312a | Vibration immission in buildings |
| UIC 513 | Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles |
| UNI 9916 | Criteria for the measurements of vibrations and the assessment of their effects on buildings |
| UNI 9942 | Methods for measurement of vibrations generated internally of railways tunnels |
| VDI – Verein Deutscher Ingenieure | |
| VDI 2038-1 VDI 2038-2 VDI 2038-3 |
Serviceability of structures under dynamic loads – Methods of analysis and evaluation in structural dynamics Part 1: Basics, methods, procedures and load Part 2: Shock and vibration – prognosis, measurement, evaluation and reduction measures Part 3: Secondary airborne sound – basics, prognosis, measurement, evaluation and reduction measures |
| VDI 2056 | Evaluation of mechanical vibrations of rotating machinery (withdrawn); replacement: ISO 10816 |
| VDI 2057-1 VDI 2057-2 VDI 2057-3 VDI 2057-4.1 VDI 2057-4.2 VDI 2057-4.3 |
Human exposure to mechanical vibrations Part 1: Whole-body vibration Part 2: Hand-arm vibration Part 3: Assessment (withdrawn) Part 4.1: Measurements and assessment for workshop places in buildings Part 4.2: Measurement and evaluation for workshop places on vehicles (withdrawn) Part 4.3: Measurements and assessment for ships and floating vessels (withdrawn and replaced by ISO 20283-5) |
| VDI 2059-1 VDI 2059-3 VDI 2059-4 VDI 2059-5 |
Shaft vibrations of turbosets; principles for measurement and evaluation Shaft vibrations of industrial turbosets; measurement and evaluation Shaft vibrations of gas turbosets; measurement and evaluation Shaft vibrations of gas turbosets; measurement and evaluation |
| VDI 2062-1 VDI 2062-2 |
Shock and vibration isolation Part 1: Conceptions and principles Part 2: Isolation elements, materials and component parts of isolation |
| VDI 2063 | Measurement and evaluation of mechanical vibrations of reciprocating piston engines and piston compressors (withdrawn); replacement: VDI 3838 |
| VDI 2064 | Active vibration isolation |
| VDI 2149 | Transmission dynamics; elastic mechanisms |
| VDI 3831 | Protective measures against vibration effects on man |
| VDI 3832 | Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition |
| VDI 3833-1 VDI 3833-2 |
Dynamic damper and dynamic vibration absorber Part 1: Dynamic damper – Fundamentals, characteristics, implementation, application Part 2: Dynamic vibration absorber and dynamic vibration absorption |
| VDI 3834 | Measurement and evaluation of the mechanical vibrations of wind energy plants and their components – Wind energy plants with gears |
| VDI 3836 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers |
| VDI 3837 | Ground-borne vibration arising from rail systems at grade – Spectral prediction method |
| VDI 3838 | Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW – Addition to ISO 10816-6 |
| VDI 3839-1 VDI 3839-2 VDI 3839-4 VDI 3839-5 VDI 3839-6 VDI 3839-7 VDI 3839-8 |
Instructions on measuring and interpreting the vibrations of machines Part 1: General principals Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components Part 4: Typical vibration patterns with fans (draft) Part 5: Typical vibration patterns with electrical machines Part 6: Typical vibration patterns with machine sets in hydraulic power stations Part 7: Typical vibration patterns with centrifugal pumps Part 8: Typical vibration patterns with reciprocating machines |
| VDI 3840 | Vibration analysis for machine sets |
| VDI 3841 | Vibration monitoring of rotating machinery – necessary measurement |
| VDI 3842 | Vibrations in piping systems |